Kenwood DDX4018DAB Instruction Manual - Page 42
<Language>, <Clock>, <Smartphone Setup>, <Bluetooth Setup>, <Beep>, <
View all Kenwood DDX4018DAB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Settings Select the text language used for on-screen information. For details, see "Initial settings" on page 5. Set the clock. For details, see "Clock settings" on page 6. Specify the connection method of Android/iPod/ iPhone. 1 Select the device type (1), then touch [Change] (2). 2 Select the connection method (1), then confirm the selection ([OK] or [Next]) (2). If [iPod/iPhone] is selected in step 1: [USB 1 Wire] [Bluetooth] Select this when the device is connected via the USB input terminal (cable from the rear panel). Select this when the device is connected via Bluetooth. (Go to step 3.) If [Android/Other] is selected in step 1: The screen appears. Go to step 3. 3 When selecting [Bluetooth] as the connection method: Select the device (1), then press [OK] (2) to connect. • If the device is already connected, skip step 1. Configure settings for using a Bluetooth device, such as connection and other general operations. For details, see "Bluetooth settings" on page 31. • ON (Initial): Activates the key-touch tone. • OFF: Deactivates the key-touch tone. Memorize, recall, or clear the settings you have made. • The memorized settings are kept even when the unit is reset. Touch [Yes] to display the setting screen, then select an operation: • Recall: Recalls the memorized settings. • Memory: Memorizes the current settings. • Clear: Clears the currently memorized settings. • Cancel: Cancels. A confirmation message appears. Touch [Yes]. This unit has its own Registration Code. Once you have played back a file with the Registration Code recorded, this unit's Registration Code is overwritten for copyright protection. • Touch [Enter] to display the information. • To return to the previous screen, touch [OK]. 38 ENGLISH