Kenwood DDX4018DAB Instruction Manual - Page 50
References
View all Kenwood DDX4018DAB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Installation and Connection Connecting external components 1 Navigation input (NAV)*1 2 Steering wheel remote controller input (REMO-IN)*1 • Connect to the car's steering remote harness. Contact your KENWOOD dealer for details. 3 Microphone input (MIC) (Page 45) 4 Audio video input (AV-IN) Connect the following type of 4-pole mini plug: 1 Left audio 2 Right audio 3 Ground 4 Composite video 5 Video output (V-OUT) 6 Rear view camera input (R-CAM) References 7 Output terminals*2 • Left output (White) • Right output (Red) REAR: Rear speaker preouts FRONT: Front speaker preouts SW: Subwoofer preouts For 3-way crossover: REAR: Tweeter preouts FRONT: Mid range speaker preouts SW: Woofer preouts *1 Only for DDX4018DAB/DDX4018BT. *2 When connecting an external amplifier, connect its ground wire to the chassis of the car; otherwise the unit may be damaged. Maintenance Cleaning the unit • Do not use any solvent (for example, thinner, benzine, etc.), detergent, or insecticide. This may damage the monitor or the unit. • Gently wipe the panel with a soft, dry cloth. Handling discs • Do not touch the recording surface of the disc. • Do not stick tape etc. on the disc, or use a disc with tape stuck on it. • Do not use any accessories for the disc. • Clean from the center of the disc and move outward. • Clean the disc with a dry silicone or soft cloth. Do not use any solvents. • When removing discs from this unit, pull them out horizontally. • Remove burrs from the center hole and disc edge before inserting a disc. More information About playable files Audio files • This unit can play back the following files with following codec and extension code: - For disc: MP3 (.mp3), WMA (.wma), WAV (.wav), AAC (.m4a) - For USB mass storage class device: MP3 (.mp3), WMA (.wma), WAV (.wav), AAC (.aac, .m4a), FLAC (.flac) 46 ENGLISH