Kenwood DDX4018DAB Instruction Manual - Page 49

Installation and Connection Wiring connection 10 A fuse Connect the aerial cord to the aerial terminal/DAB aerial input *1 Only for DDX4018BT/ DDX318BT. *2 Only for DDX4018DAB. *3 Only for DDX4018DAB/ DDX4018BT. *4 If no connections are made, do not let the cable come out from the tab. Purple with white stripe Light green Light blue with yellow stripe Blue with white stripe (output A) Brown Yellow (Battery wire) Red (Ignition wire) Red (A7) Yellow (A4) Connector A Connector B Note: Total ouput for blue with white stripe wires (output A + output B) is 12 V 350 mA. USB input terminal (1 m) To the car's reverse lamp harness when using the optional rear view camera Extension wire ( ø ) To the car's parking brake detection switch harness (For best safety, be sure to connect the parking sensor.) To the remote adapter (not supplied) which is compatible with your car To the power control terminal when using the optional power amplifier (Or) To the aerial control terminal in the vehicle To the terminal that is grounded when either the telephone rings or during conversation. (To connect the Kenwood navigation system, consult your navigation manual.)*3 Connecting the ISO connectors You may need to modify the wiring of the supplied wiring harness as illustrated below. Red (Ignition wire) Red (A7) Unit Vehicle Yellow (Battery wire) Yellow (A4) Default wiring Connector B Connector A Pin A4 A5 A6 A7 A8 B1/B2 B3/B4 B5/B6 B7/B8 Color and Function Yellow Blue/White (output B) Orange/White Red Black : Battery : Power control : Dimmer : Ignition (ACC) : Ground connection Purple ] / Purple/Black [ Gray ] / Gray/Black [ White ] / White/Black [ Green ] / Green/Black [ : Right speaker (Rear/Tweeter*2) : Right speaker (Front/Mid Range*2) : Left speaker (Front/Mid Range*2) : Left speaker (Rear/Tweeter*2) ENGLISH 45