Kenwood DDX814 Instruction Manual - Page 47

Voice Control (DNX9140 only) The unit is equipped with Automatic Speech Recognition function which allows you to operate it with your voice. The supported languages are US English, UK English, French, German, Dutch, Italian, and Spanish. For information on the recognizable voice commands, refer to (separate volume) • ASR on the Language Setting screen should be set to "Enabled"
See (page 68). Voice Control 1 Enter into the Voice control mode Press the TALK switch. The voice recognition icons will be attached to the buttons supporting the voice control. 2 Speak the command Speak the command. (Ex: Speak "Source Select".) You will hear a beep. The screen has changed to the Source Control screen. You will hear a beep again. 3 Speak the command Speak the command. (Ex: Speak "TUNER".) You will hear a beep. The screen has changed to the Tuner Control screen. You will hear a beep again. 4 Control the source with voice control Repeat the same procedure as step 2 or 3. For information on the recognizable voice commands, refer to (separate volume). 5 End the voice control mode Press the TALK switch. ⁄ • The voice control is disabled while operating the handsfree phone. • The voice control is disabled when is displayed on the upper-right corner of the screen. • The voice control is canceled when the screen is touched or any of the buttons, except the [VOLUME] button, on the front panel or the remote control unit is pressed. • The voice control is disabled while using your cell-phone with hands-free. • The voice control is canceled if no operation is continued for a certain period of time. Tips for voice command The voice recognition icons are displayed on the operation buttons on the screen when the voice control mode is turned on. The icons are divided into two types: the number icon (such as ) for the list buttons, and the icon for the operation buttons. The command name may be displayed. English 47