Kenwood DDX814 Instruction Manual - Page 71
Monitor Angle Control, EXT SW Setup
UPC - 019048183385
View all Kenwood DDX814 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Monitor Angle Control You can adjust the position of the monitor. 1 Display the Angle Setup screen Touch [ ] > [ (page 66) ] > [System] > [Angle]. 2 Set the Monitor Angle 1 EXT SW Setup Setting up power specification of the external device for which the power is controlled from this unit. 1 Display the EXT SW Setup screen Touch [ ] > [ (page 66) ] > [System] > [EXT SW]. 2 Perform EXT SW Setup 1 Sets the Monitor angle. [Memory] Stores the current monitor angle as the angle during power off. [SW Name] Sets the name of the external device. See (page 48) for information on how to enter the name. [Output Pattern] Sets the power signal output mode. ( EXT SW1: Pulse, EXT SW2: Level) "Pulse": Generates a single power signal pulse. "Level": Continues output of high power signal. Sets to turn output on/off each time the button on the EXT SW Control screen is touched. [Pulse Set] Sets the Pulse signal output time. Outputs 500ms when "1" is set. Increases by 200ms with each step. Up to 100 steps can be set. English 71