Kenwood DDX814 Instruction Manual - Page 80
DSP Bypass Control, Speaker Setup
UPC - 019048183385
View all Kenwood DDX814 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Setup Menu DSP Bypass Control Temporarily bypassing DSP (Digital Signal Processor) System. 1 Display the Audio SETUP screen Touch [ ] > [ 66) ] > [Audio SETUP]. (page 2 Set the DSP Select [Bypass] There is no effect by DSP. [Through] There is an effect by DSP. ⁄ • When the mode is set to [Bypass], DSP System cannot be adjusted. Speaker Setup You can select a speaker type and its size to get the best sound effects. 1 Display the Speaker Select screen Touch Audio SETUP] > [Speaker Select]. (page 66) 2 Select a speaker you wish to adjust When the speaker type and size are set, the speaker crossover network and equalizer curve are set automatically. 1 2 3 4 1 Center speaker 2 Front speaker 3 Rear speaker 4 Subwoofer [Tweeter] You can set the tweeter when you are selecting front speakers. If you are using a tweeter together with the front speakers, set the tweeter to "ON". In the "ON" position, the Equalizer is adjusted to its best position. [X'over] Displays the Speaker Crossover Setup screen. You can adjust the crossover setup that was set automatically when you selected the speaker type. 80 DNX9140/DDX814/DDX8034BT