Kenwood DDX814 Instruction Manual - Page 64
Surround Control
UPC - 019048183385
View all Kenwood DDX814 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Audio Control Surround Control You can set up the sound field. 1 Display the Surround Control screen Touch Surround Control]. (page 61) 2 Set the Surround Control 1 Dolby Pro Logic II Music Adjustment 1 Display the Dolby Pro Logic II Music Adjust screen 2 Adjust the sound field 1 Sets a sound field. You can select any of the following sound fields. "Bypass"/ "Bypass+Center"/ "Dolby PLII Movie"/ "Dolby PLII Music"/ "Dolby PLII Matrix" [Stream Information] Displays the present source information. The stream (Dolby Digital, dts, Linear PCM, MPEG, SDDS, AAC or MP3/WMA), input channels (front or rear channels), and sampling frequency are displayed. ⁄ • When you have selected the TV or TUNER source and when you set the Dolby PL, we recommend you to select the "Dolby PLII Matrix" mode. If you select another Dolby PLII mode, the sound is NOT output from rear speakers when you receive monaural broadcasting sounds. • Surround control can be set for each source. [Dimension Control] Sets the surround position by adjusting the front and rear volume balance. [Center Width Control] Sets the vocal image position by adjusting the right and left vocal volume level. [Panorama Mode] Turns the Panorama mode On or Off. ⁄ • You cannot use the during playback of a Multi-channel source. 64 DNX9140/DDX814/DDX8034BT