Kenwood DDX814 Instruction Manual - Page 74
Panel Color Coordinate
UPC - 019048183385
View all Kenwood DDX814 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Setup Menu Panel Color Coordinate Sets the button illumination color. 1 Display the Color screen Touch [ ] > [ (page 66) ] > [Display] > [Color]. 2 Display the Panel Color Coordinate screen To register your original color 1 Start the RGB coordinate 2 Adjust each color value 1 [Initialize] Initialization resets the settings made using the Panel Color to the default settings made at the factory. [Panel Color Scan] When set to "ON", the illumination color of the screen and buttons changes one after another. ⁄ • When touching [SET], make sure [Panel Color Scan] is set to "OFF". 3 Select a color 1 1 Selects a preset number to register. [Red Value] Adjusts the Red value. [Green Value] Adjusts the Green value. [Blue Value] Adjusts the Blue value. 3 Select a Preset number to register 2 sec. Adjusted color is registered to the selected Preset button. 4 Complete the color coordination 1 Sets to the touched color. [Adjust] Sets and registers favorite color to the preset buttons ([P1] - [P3]). 74 DNX9140/DDX814/DDX8034BT