Kenwood DDX814 Instruction Manual - Page 65

Position You can adjust the sound effects according to your listening position. 1 Display the Position screen Touch Position]. (page 61) 2 Set the Position Control [P1] - [P3] Stores the present adjustment setup in memory, or calls it from memory. To store your adjustment in memory: Continue to touch [P1] to [P3] more than 2 seconds. To call your adjustment from memory: Touch [P1] to [P3] of your adjustment you wish to call from memory. [2], [3] Sets a listening position. You can select any of "Front R" (Right front), "Front L" (Left front), "Front All" (All front), and "All" (All) positions. [DTA] Displays the Position DTA (Digital Time Alignment) screen. 3 Exit Position Control Position DTA Control You can fine-adjust your listening position. 1 Display the Position DTA screen 2 Select a speaker you wish to adjust 1 2 3 4 5 6 1 Center speaker 2 Left front speaker 3 Right front speaker 4 Left rear speaker 5 Right rear speaker 6 Subwoofer [2], [3] Finely adjusts the value set with the Position function. [Total DTA] Indicates setup distance. The adjusted distance (Position and Position DTA values), and the total of the distance adjusted by Car Type Set Up (page 82) and the adjustment distance for position setup are indicated. 3 Finely adjust the distance ⁄ • The final distance is adjusted to the total of Car Type Set Up value (page 82) and Position Setup (both Position and Position DTA) value. • If you change the Car Type Set Up value (page 82), the position is set to "All". • Only the adjusted distance of position setup (Position and Position DTA values) is stored in memory. Therefore, the final adjustment distance changes if you change the Car Type Set Up value (page 82). Finely adjust the value set with the Position function. English 65