Kenwood DMX8018S Operation Manual - Page 7
Security Code Setup, To change the security code
View all Kenwood DMX8018S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
■■ [Camera] Set the parameters for the camera. 1 Touch [Camera]. 2 Set each item and touch [ ]. For detailed operation, see Camera Setup (P.37). ■■ [DEMO] Set the demonstration mode. Default is "ON". 1 Touch [DEMO] and set ON or OFF. 2 Touch [Finish]. 3 Touch [Security]. Basic Operations hhSecurity screen appears. 4 Touch [Security Code Set] on the Security screen. hhSecurity Code Set screen appears. 5 Enter a security code with four-digit number and touch [Enter]. NOTE • These settings can be set from the SETUP menu. See Setting Up (P.40). Security Code Setup You can set up a security code to protect your receiver system against theft. When the Security Code function is activated, the code cannot be changed and the function cannot be released. Note the Security Code can be set as the 4 digit number of your choice. 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [SETUP]. hhSETUP Menu screen appears. 6 Enter the same code again and touch [Enter]. Now, your security code is registered. NOTE • Touch [BS] to delete the last entry. • If you enter a different security code, the screen returns to step 5 (for the first code entry). • if you have disconnected the Receiver from battery, enter the correct security code as that you have entered in step 5 and touch [Enter]. You can use your receiver. To change the security code: 1 Touch [Security Code Change] on the Security screen, then repeat step 5 and 6. To clear the security code: 1 Touch [Security Code Cancellation] on the Security screen. English 7