Kenwood KIV-BT900 Instruction Manual - Page 39
Demonstration Mode Setting, Muting Volume upon Reception of Phone Call
UPC - 019048189790
View all Kenwood KIV-BT900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
3 Enter Initial Setting mode Turn the [Volume] knob and press it when the desired item is displayed. Select "Initial Settings". 4 Select the setting item to adjust Turn the [Volume] knob and press it when the desired item is displayed. Display Overview "Initial Settings" "Source Select" Sets the source selection method. "1"/ "2" "Beep" Setting the operation check sound (beep sound) ON/OFF. "ON"/ "OFF" "Menu Language You can select the display language for the Select" Menu list item. "English"/ "Français"/ "Español" "Built in AUX" When this is set to ON, AUX source can be selected. "ON": Allows AUX source to be selected. Use this setting when the built-in AUX terminal is connected to the external equipment all the time. "OFF": Disable AUX source selection. Use this setting when the built-in AUX terminal is not used. "Favorite Delete" Deletes Favorite Preset Memory. Refer to (page 49). "Built in AMP" Selecting"OFF"turns off the built-in amplifier. Turning off the built-in amplifier improves the quality of the sound from Preout. "ON"/ "OFF" "AV Out Set" Changes the iPod setting from AV Output to output-only terminal. "ON"/ "OFF" "System F/W Update" Updates the firmware. The update information will be posted on the following URL as necessary. www.kenwood.com/cs/ce/ ( : Factory setting) 5 Make a setting Turn the [Volume] knob to select a setting value, and then press the [Volume] knob. 6 Exit Menu List mode Press the [MENU] button for at least 1 second, and then press it again briefly. Demonstration Mode Setting Turning the demonstration mode ON/OFF. 1 Enter Menu List mode Press the [MENU] button. 2 Enter Demonstration mode setting Turn the [Volume] knob and press it when the desired item is displayed. Select "DEMO Mode". 3 Set the Demonstration mode Turn the [Volume] knob and press it when the desired item is displayed. Select "ON" or "OFF". 4 Exit Menu List mode Press the [MENU] button for at least 1 second, and then press it again briefly. Function of KIV-700 Muting Volume upon Reception of Phone Call The audio system automatically mutes when a call comes in. When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes back ON. When the call ends Hang up the phone. The "CALL" display disappears and the audio system comes back ON. ⁄ • To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to (page 76). English | 39