Kenwood KIV-BT900 Instruction Manual - Page 78
Installation the Microphone Unit, Accessory of KIV-BT900
UPC - 019048189790
View all Kenwood KIV-BT900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Installation/Removing the Unit Accessory of KIV-BT900 Installation the Microphone Unit 1 Check the installation position of the microphone (accessory 7). 2 Remove oil and other dirt from the installation surface. 3 Install the microphone. 4 Wire the microphone cable up to the hands-free box with it secured at several positions using tape or the like. Accessory 7 Fix a cable with a commercial item of tape. Peel the release coated paper of double-face adhesive tape to fix on the place shown above. Adjust the direction of the microphone to the driver. ⁄ • Install the microphone as far as possible from the cellphone. 78 | KIV-BT900/ KIV-700
Accessory of KIV-BT900
Installation the Microphone Unit
1
Check the installation position of the microphone
(accessory
7
).
2
Remove oil and other dirt from the installation
surface.
3
Install the microphone.
4
Wire the microphone cable up to the hands-free
box with it secured at several positions using tape
or the like.
Fix a cable with a commercial
item of tape.
Peel the release coated paper of double-face adhesive tape to
fix on the place shown above.
Adjust the direction of the microphone to the driver.
Accessory
7
⁄
• Install the microphone as far as possible from the cell-
phone.
78
|
KIV-BT900/ KIV-700
Installation/Removing the Unit