Kenwood KTC-SR902 Instruction Manual - Page 12

English Operations from Model-D Control Unit Channel Preset Memory Putting the channel in the memory. 1 Select the preset band Press the [FM] button. 2 Enter Memory mode Press the [P.M] button for at least 1 second. "Preset Memory" is displayed. 3 Select the channel to put in the memory Press the [4] or [¢] button. 4 Select the preset number Press the [FM] or [AM] button. 5 Put the channel in the memory Press the [P.M] button for at least 2 seconds. The preset number display blinks 1 time. 6 Repeating steps 3 to 5 and putting the desired channel in the memory. On each band, 1 channel can be put in the memory on each [1] - [6]. 7 Exit Memory mode Press the [P.M] button. • Only the channel number is stored. Category information is not stored. • You can set up to 6 memories even on a control unit with 8 preset buttons. Channel Scan Every receivable Channel is checked for 10 seconds. 1 Select a scan item from the menu item list. 2 Start Channel Scan Press the [4] or [¢] button for at least 1 second. The channel scan will start. 3 Release it when the channel you want to listen to is received Press the [4] or [¢] button for at least 1 second, or press the [MENU] button to release the menu mode. Switching Seek Mode Sets the seeking mode. Press the [AUTO] button. Each time the button is pressed the Seek mode switches as shown below. Display Operation "Channel" "Preset" Normal manual seeking control. Search in order of the channels in the Preset memory. This function cannot be used in the category and channel search mode. - 12 -