Kenwood KTC-SR902 Instruction Manual - Page 9

Select Sirius Satellite Radio Mode Listening to the satellite radio. Press the [SRC] button. Select the "SIRIUS" display. • You need to subscribe to SIRIUS to receive the service by Sirius Satellite Radio. Consult SIRIUS if "CALL 888-539 SIRIUS TO SUBSCRIBE"/ "CALL 888 539-SIRI" appears. • It may take a little time to start receiving after you selected the SIRIUS source. • When you are using the control unit having the Sirius/Dab setting in the menu system, select "SIRIUS"/"SIRI" in this menu. Selecting the Preset Band Press the [FM] button. Each time the button is pressed the preset band switches between the SR1/Si1,SR2/Si2 and SR3/Si3. Tuning Selecting the channel. Press the [4] or [¢] button. Category Select The Category that includes the channel received switches to the next. Press the [AM] button. • If there is no receivable Channel in Category, the Category switches to the next. • You cannot operate this unit until all the Category information is acquired. • Select category to switch to the first channel that contains that category. Channel Preset Memory Putting the channel in the memory. 1 Select the preset band Press the [FM] button. 2 Select the channel to put in the memory Press the [4] or [¢] button. 3 Put the channel in the memory Press the [1] - [6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 channel can be put in the memory on each [1] - [6] button. Only the channel number is stored. Category information is not stored. Preset Tuning Calling up the channels in the memory. 1 Select the preset band Press the [FM] button. 2 Call up the channel Press the [1] - [6] button. -9-