Kenwood KTC-SR902 Instruction Manual - Page 13

Category and Channel Search Select the category and channel you wish to listen to. 1 Enter category and channel search mode Press the [2/6] button for at least 1 second. 2 Select the category Press the [FM] or [AM] button. 3 Select the channel Press the [4] or [¢] button. Information (Lower Part Display) Artist Name Song Title Channel Name You cannot apply the same setting to Upper Part and Lower Part. Canceling category and channel search mode Press the [2/6] button. • You cannot operate this unit until all the Category information is acquired. • Entering and canceling the category and channel search mode with remote Press the [38] button on the remote. Direct Access Tuning (Function of remote) Entering the channel and tuning. 1 Enter Direct Access Tuning mode Press the [DIRECT] button on the remote. 2 Enter the channel Press the number buttons. Switching Display When you are listening to the Sirius satellite radio, you can switch over the display information as follows. For operations, see the page of the instruction manual of your control unit. What is displayed may partly depend on control units to be connected. Information (Upper Part Display) Band & Channel Number Channel Name Song Title Artist Name Category Name 3 Do Channel Search Press the [4] or [¢] button. Canceling Direct Access Tuning Press the [DIRECT] button on the remote. • If you make no button operation for 10 seconds, the Direct Access Tuning mode is automatically canceled. • You can set up to Channel number 223. • You cannot search for a channel number which is not broadcasting. • If you cannot receive any signal in the input Channel due to a bad condition on radio wave or another problem, "Acquiring Signal" appears. - 13 -