Kenwood LSF-1010 User Manual - Page 16
Adjusting the Satellite Speaker Position, Getting Ready to Adjust, Adjusting the Arm Height
![]() |
View all Kenwood LSF-1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
16 Adjusting the Satellite Speaker Position You can adjust the position of the speaker by changing the height and angle of the arm. 2. Loosen the two screws. Screw LSF-1010 (EN) Use a coin to turn each screw. • Once you have loosened both screws you will be able to move the arm up and down, or to remove it entirely. FRANÇAIS DEUTSCH NEDERLANDS Adjusting the arm height Adjusting the arm angle Getting Ready to Adjust Loosen the two arm screws holding the arm in place (one screw on each side of the arm), so that you can move the arm up and down. 1. Remove the screw cap covering each arm screw. Screw caps To remove each cap, grasp it at the circumference and peel it off. Use a coin to turn the screws (one screw on each side). Adjusting the Arm Height Move the arm up or down to raise or lower the speaker. 1. Loosen the two arm screws as described above, so that the arm can move up and down. 2. Raise or lower the arm to the desired height, then retighten the two screws. To replace the cap, place it over the screw head and lightly press it along the circumference. Move arm up or down to desired position. Use a coin to retighten the screws. 3. Replace the screw caps. You may now want to readjust the angle of the speaker on the arm. You can do this by loosening the screw holding the speaker to the arm, repositioning the screw, and then retightening it. See "Adjusting the Speaker Angle," on page 8. ITALIANO ESPAÑOL
![](/manual_guide/products/kenwood-lsf1010-user-manual-44cef86/16.png)