Kenwood LSF-1010 User Manual - Page 25
Specifications, Subwoofer, Satellite speaker
View all Kenwood LSF-1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
FRANÇAIS Specifications Satellite speaker System Full-range Speaker System (Magnetically shielded) Enclosure Acoustic Air Suspension type Loudspeaker 50 mm (2 ") Cone type Nominal Impedance 6 Ω Peak Input Power 60 W Maximum Input Power 40 W Sensitivity 80 dB/W at 1 m Frequency Response 200 Hz to 20,000 Hz Dimensions (*1 Width : 114 mm (4-1/2 ") Height : 280 mm (11 ") Depth : 130 mm (5-1/8 ") Net Weight (*2 650 g (1.4 lb) / piece *1: Dimensions may vary depending on the setting up of the satellite speakers. *2: Stand included. 25 LSF-1010 (EN) Subwoofer System Subwoofer system with built-in amplifier (Magnetically shielded) [Audio section] Rated Output Power 40 W DIN (300 Hz, 6 Ω) Output Power 50 W RMS (300 Hz,10%, 6 Ω) Input Sensitivity / Impedance RCA-type pin-plug jack (LINE IN 70 mV / 20 kΩ 140 mV / 20 kΩ (MONO) Push-type terminals 1.4 V / 10 kΩ Turnover frequency 80 Hz to 400 Hz Phase Switching NORMAL, REVERSE [Speaker section] Enclosure Bass-reflex type (Passive radiator system) Loudspeakers Driver 100 mm (4 ") Cone type Passive radiator 125 mm (5 ") Nominal Impedance 6 Ω [General] Power Consumption 95 W Frequency Response 40 Hz to 800 Hz (at 400Hz turnover frequency) Dimensions Width : 160 mm (6-5/16 ") Height : 270 mm (10-5/8 ") Depth : 274 mm (10-13/16 ") Net Weight 4.4 kg (9.7 lb) DEUTSCH NEDERLANDS ITALIANO ESPAÑOL 1.KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. Notes 2.Sufficient performance may not be possible at very low temperatures (0°C or less).