KitchenAid KBSN702MBS Owners Manual - Page 31

PERFORMANCE DATA SHEET, Water Filtration System

Get KitchenAid KBSN702MBS PDF manuals and user guides View all KitchenAid KBSN702MBS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

PERFORMANCE DATA SHEET Water Filtration System Model EDR3RXD1B/P1WB2 Capacity 200 Gallons (757 Liters) with PID; 100 Gallons (378 Liters) without PID Replacement Filter EDR3RXD1, EDR3RXD1B, WHR3RXD1 and KAD3RXD1 System tested and certified by NSF International against NSF/ANSI Standard 42, 53, 401 and CSA B483.1 for the reduction of contaminants specified on the Performance Data Sheet. This system has been tested according to NSF/ANSI Standards 42, 53, 401 and CSA B483.1 for the reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI Standards 42, 53, 401 and CSA B483.1. Substance Reduction Aesthetic Effects Influent Challenge Concentration Maximum Permissible Average % Reduction Product Water Concentration Chlorine Taste/Odor 2.0 mg/L ± 10% 50% reduction >97.5% Particulate Class I* At least 10,000 particles/mL 85% reduction 99.2% Contaminant Reduction Lead: @ pH 6.5 / @ pH 8.5 Influent Challenge Concentration 0.150 mg/L ± 10% Maximum Permissible Average % Reduction Product Water Concentration 0.010 mg/L >99.3% / >99.3% Mercury: @ pH 6.5 / @ pH 8.5 0.006 mg/L ± 10% 0.002 mg/L >96.4% / 90.8% Asbestos 107 to 108 fibers/L†† 99% 99% Cysts† 50,000/L min. 99.95% >99.99% Turbidity 11 NTU ± 10% 0.5 NTU >99.1% Alachlor 0.040 mg/L ± 10% 0.002 mg/L 97.6% Atrazine 0.009 mg/L ± 10% 0.003 mg/L 94.50% Benzene 0.015 mg/L ± 10% 0.005 mg/L 96.6% Carbofuran 0.080 mg/L ± 10% 0.040 mg/L 91.1% Chlorobenzene 2.000 mg/L ± 10% 0.100 mg/L 99% Endrin 0.006 mg/L ± 10% 0.002 mg/L 96.6% Ethylbenzene 2.100 mg/L ± 10% 0.700 mg/L 99.9% Lindane 0.002 mg/L ± 10% 0.0002 mg/L 99% MTBE 0.015 mg/L ± 10% 0.005 mg/L 90.6% O-Dichlorobenzene 1.800 mg/L ± 10% 0.600 mg/L 99.9% Tetrachloroethylene 0.015 mg/L ± 10% 0.005 mg/L 96.4% Toxaphene 0.015 mg/L ± 10% 0.003 mg/L >93.7% TTHM 0.045 mg/L ± 10% 0.080 mg/L 99.5% Styrene 2.000 mg/L ± 10% 0.100 mg/L 99.9% VOC 0.300 mg/L ± 10% 0.015 mg/L 99.7% Atenolol 200 ± 20% 30 ng/L 95.7% Trimethoprim 140 ng/L ± 20% 20 ng/L 96.1% Linuron 140 ng/L ± 20% 20 ng/L 96.3% Estrone 140 ng/L ± 20% 20 ng/L 90.6% 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
31
PERFORMANCE DATA SHEET
Water Filtration System
Model EDR3RXD1B/P1WB2 Capacity 200 Gallons (757 Liters) with PID; 100 Gallons (378 Liters) without PID
Replacement Filter EDR3RXD1, EDR3RXD1B, WHR3RXD1 and KAD3RXD1
System tested and certified by NSF International against NSF/ANSI Standard
42, 53, 401 and CSA B483.1 for the reduction of contaminants specified on the
Performance Data Sheet.
This system has been tested according to NSF/ANSI Standards 42, 53, 401 and CSA B483.1 for the reduction of the substances listed
below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to
the permissible limit for water leaving the system, as specified in NSF/ANSI Standards 42, 53, 401 and CSA B483.1.
Substance Reduction
Aesthetic Effects
Influent Challenge
Concentration
Maximum Permissible
Product Water Concentration
Average % Reduction
Chlorine Taste/Odor
2.0 mg/L ± 10%
50% reduction
>97.5%
Particulate Class I*
At least 10,000 particles/mL
85% reduction
99.2%
Contaminant Reduction
Influent Challenge
Concentration
Maximum Permissible
Product Water Concentration
Average % Reduction
Lead: @ pH 6.5 / @ pH 8.5
0.150 mg/L ± 10%
0.010 mg/L
>99.3% / >99.3%
Mercury: @ pH 6.5 / @ pH 8.5
0.006 mg/L ± 10%
0.002 mg/L
>96.4% / 90.8%
Asbestos
10
7
to 10
8
fibers/L††
99%
99%
Cysts†
50,000/L min.
99.95%
>99.99%
Turbidity
11 NTU ± 10%
0.5 NTU
>99.1%
Alachlor
0.040 mg/L ± 10%
0.002 mg/L
97.6%
Atrazine
0.009 mg/L ± 10%
0.003 mg/L
94.50%
Benzene
0.015 mg/L ± 10%
0.005 mg/L
96.6%
Carbofuran
0.080 mg/L ± 10%
0.040 mg/L
91.1%
Chlorobenzene
2.000 mg/L ± 10%
0.100 mg/L
99%
Endrin
0.006 mg/L ± 10%
0.002 mg/L
96.6%
Ethylbenzene
2.100 mg/L ± 10%
0.700 mg/L
99.9%
Lindane
0.002 mg/L ± 10%
0.0002 mg/L
99%
MTBE
0.015 mg/L ± 10%
0.005 mg/L
90.6%
O-Dichlorobenzene
1.800 mg/L ± 10%
0.600 mg/L
99.9%
Tetrachloroethylene
0.015 mg/L ± 10%
0.005 mg/L
96.4%
Toxaphene
0.015 mg/L ± 10%
0.003 mg/L
>93.7%
TTHM
0.045 mg/L ± 10%
0.080 mg/L
99.5%
Styrene
2.000 mg/L ± 10%
0.100 mg/L
99.9%
VOC
0.300 mg/L ± 10%
0.015 mg/L
99.7%
Atenolol
200 ± 20%
30 ng/L
95.7%
Trimethoprim
140 ng/L ± 20%
20 ng/L
96.1%
Linuron
140 ng/L ± 20%
20 ng/L
96.3%
Estrone
140 ng/L ± 20%
20 ng/L
90.6%