Konica Minolta C83hc High Chroma EF-103 AccurioPress C3080/C3080P/C3070/Print - Page 24

2.2 Installation Procedures 2 3 Install the bottom auxiliary guide assy [A] in the Large Ca- pacity Unit LU-202m/LU-202XL/LU-202XLm tray. % Check the curl direction at the leading edge of the envelope, and remove the holding paper, if necessary. % Align the positioning pin of the bottom auxiliary guide assy [A] with the installation hole of the tray. % Align the detent of the bottom auxiliary guide assy [A] with the groove on the back end guide. 4 Hold the flap of the envelope to use and droop vertically. 5 Put the leading edge on a flat surface to check the curl di- rection and that the curl amount is 8 mm or less. Curl direction Downward curl: With MK-746 (refer to Step 8 and later) Upward curl: Without MK-746 NOTICE Envelopes with 8 mm or more curl amount are not guaranteed. Upward curl Curl amount Downward curl 8mm or less 6 Align the adjusting block assies (2 pieces) to K1 and K0 on the indicating label, and install them. % Align the mark on the adjusting block assy with the mark on the indicating label. K1 (270 x 382 mm) K0 (287 x 382 mm) AccurioPress C3080/C3080P/C3070, AccurioPrint C3070L 2-16