Konica Minolta C83hc High Chroma EF-103 AccurioPress C3080/C3080P/C3070/Print - Page 30

Loading Envelopes in the Tray 5 of Paper Feeder Unit PF-707m

Page 30 highlights

4.1 Loading Envelopes in the Tray 4 4.1.1 Loading Envelopes in the Tray 5 of Paper Feeder Unit PF-707m 1 Pull out tray 5. 2 Widen the side guides and rear guide. 3 Place envelopes with the print side up. % Align the envelopes to the left side of the tray with the flaps on the right. 4 Align the side guides and rear guide to the edge of the envelopes. NOTICE Do not apply excessive force when moving the side guides. Otherwise, the guides may be damaged. 5 Push in tray 5 until it locks into place. 4.1.2 Loading Envelopes in Large Capacity Unit LU-202m/LU-202XL/LU-202XLm Using K2 (240 x 332 mm) Envelopes NOTICE If jam occurs frequently when you load a very small number of K2 envelopes having a paper weight of 80 g/m2 or less, follow steps 6 and 7. 1 Open the upper door. 2 Bend and set the envelope as shown in the right figure. AccurioPress C3080/C3080P/C3070, AccurioPrint C3070L 4-3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45

AccurioPress C3080/C3080P/C3070, AccurioPrint C3070L
4-3
4.1
Loading Envelopes in the Tray
4
4.1.1
Loading Envelopes in the Tray 5 of Paper Feeder Unit PF-707m
1
Pull out tray 5.
2
Widen the side guides and rear guide.
3
Place envelopes with the print side up.
%
Align the envelopes to the left side of the tray with the
flaps on the right.
4
Align the side guides and rear guide to the edge of the envelopes.
NOTICE
Do not apply excessive force when moving the side guides. Otherwise, the guides may be damaged.
5
Push in tray 5 until it locks into place.
4.1.2
Loading Envelopes in Large Capacity Unit LU-202m/LU-202XL/LU-202XLm
Using K2 (240 x 332 mm) Envelopes
NOTICE
If jam occurs frequently when you load a very small number of K2 envelopes having a paper weight of 80
g/m
2
or less, follow steps 6 and 7.
1
Open the upper door.
2
Bend and set the envelope as shown in the right figure.