Konica Minolta KIP 2300 KIP 2300 User Manual - Page 15

Pressing the Board Button enables or disables Board Original Mode.

Get Konica Minolta KIP 2300 PDF manuals and user guides View all Konica Minolta KIP 2300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

No. Name 1 Upper Original Feeder 2 Lower Original Feeder 3 Upper Original Feeder Indicator 4 Lower Original Feeder Indicator 5 Original Guides 6 Levers 7 Board Button & Lamp 8 Stop Button & Lamp 9 Power Lamp 10 Front Steel Tray 11 Rear Steel Tray Function Upper Original Feeder accepts a sheet type original that is 0.05-1.49mm in thickness. Please set the original with face down. The original fed from here Feeder is ejected to the front side of scanner via Lower Original Feeder. Lower original Feeder accepts not only a sheet type original that is 0.05-1.49 in thickness, but also a board type original that is 1.5-16.0mm in thickness. Please set the original with face down. The original fed from here is ejected to the rear side of scanner and received by the Rear Steel Tray. This lights green when the Upper Original Feeder can accepts original insertion, and does not light when it can not accept. This lights green when the Upper Original Feeder can accepts original insertion, and does not light when it can not accept. And in the Board Original Mode, it blinks green when the scanner detects original size. These guides can be shifter left and right according to the original width, and prevent the original from skewing during scanning. Unlocking the Levers allow for opening the Scanner Upper Unit. Pressing the Board Button enables or disables Board Original Mode. The Board Lamp lights green when the Board Original Mode is enabled. Pressing the Stop Button during scanning will stop scanning and original transportation in the middle, and one more will eject the original to either front or rear. This shows the status of scanner. - Blinking in green : During initialization (not ready) - Lighting in green : Ready for scanning or during scanning - Lighting in orange : Scanning (original transportation) is paused - Blinking in orange : Ejecting the original - Lighting in red : Scanner has any error Helps feeding a board type original into the Lower Original Feeder. Max. number of originals : about 20 sheets of 36"x48" Max. weight of originals : 2.2kg/square meter Receives the original ejected from the scanner after scanning. Max. number of originals : about 50 sheets of 36"x48" Max. weight of originals : 5kg/square meter 1-8 Chapter 1 Before Use

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
Chapter 1
Before Use
1-8
No.
Name
Function
1
Upper Original Feeder
Upper Original Feeder accepts a sheet type original that is 0.05-1.49mm in
thickness. Please set the original with face down. The original fed from here
Feeder is ejected to the front side of scanner via Lower Original Feeder.
2
Lower Original Feeder
Lower original Feeder accepts not only a sheet type original that is 0.05-1.49
in thickness, but also a board type original that is 1.5-16.0mm in thickness.
Please set the original with face down. The original fed from here is ejected to
the rear side of scanner and received by the Rear Steel Tray.
3
Upper Original Feeder
Indicator
This lights green when the Upper Original Feeder can accepts original
insertion, and does not light when it can not accept.
4
Lower Original Feeder
Indicator
This lights green when the Upper Original Feeder can accepts original
insertion, and does not light when it can not accept. And in the Board Original
Mode, it blinks green when the scanner detects original size.
5
Original Guides
These guides can be shifter left and right according to the original width, and
prevent the original from skewing during scanning.
6
Levers
Unlocking the Levers allow for opening the Scanner Upper Unit.
7
Board Button & Lamp
Pressing the Board Button enables or disables Board Original Mode. The
Board Lamp lights green when the Board Original Mode is enabled.
8
Stop Button & Lamp
Pressing the Stop Button during scanning will stop scanning and original
transportation in the middle, and one more will eject the original to either front
or rear.
9
Power Lamp
This shows the status of scanner.
- Blinking in green : During initialization (not ready)
- Lighting in green : Ready for scanning or during scanning
- Lighting in orange : Scanning (original transportation) is paused
- Blinking in orange : Ejecting the original
- Lighting in red : Scanner has any error
10
Front Steel Tray
Helps feeding a board type original into the Lower Original Feeder.
Max. number of originals : about 20 sheets of 36”x48”
Max. weight of originals : 2.2kg/square meter
11
Rear Steel Tray
Receives the original ejected from the scanner after scanning.
Max. number of originals : about 50 sheets of 36”x48”
Max. weight of originals : 5kg/square meter