Konica Minolta Kodak i1405 Setup Guide - Page 15

Scanner tab The Scanner tab provides the following options. Paper Source NOTE: Flatbed options are only available if your scanner is equipped with the Kodak i1400 Series A3 Flatbed Accessory. • ADF: if you are scanning documents from the input tray. • Flatbed: if you are scanning documents using the flatbed. • ADF/Flatbed: when selected, the scanner will detect if the document(s) to be scanned is in the ADF or on the flatbed. Transport timeout - allows you to set the amount of time the scanner will wait after the last document enters the transport before the transport timeout action is taken. You can specify a time delay setting from 1 to 300 seconds. Energy Star - allows you to set the amount of time the scanner will remain inactive before the scanner goes into an idle state. Choices are: 0 to 60 minutes. The default is 15 minutes. Special Document Mode - allows you to scan irregularly shaped documents (e.g., pages with coupons removed or documents with large holes or cutouts in them) that may produce jams or truncated images. NOTES: • This option is not available for all models. • Using this option may decrease overall throughput 14 A-61661 May 2010