Konica Minolta Kodak i4200 Plus User Guide - Page 41

Cleaning the separation roller tires, residue between the ribs.

Get Konica Minolta Kodak i4200 Plus PDF manuals and user guides View all Konica Minolta Kodak i4200 Plus manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

Cleaning the separation roller tires 4. Pull the separation pad holder forward and remove the separation roller. NOTE: The separation roller cover is spring-loaded. Hold the separation roller cover back until you remove the separation roller, then gently lower the roller cover back in place. 5. Manually rotate and wipe the separation roller tires with a roller cleaning pad. For best results wipe parallel to the ribs in order to remove any residue between the ribs. 6. Inspect the tires. If the tires show signs of wear or damage, replace the separation roller. See "Replacement procedures" later in this chapter. 7. Reinstall the separation roller by aligning the slots on the separation roller with the holders. A-61651 September 2016 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
A-61651
September 2016
35
Cleaning the separation
roller tires
4.
Pull the separation pad holder forward and remove the separation roller.
NOTE:
The separation roller cover is spring-loaded. Hold the separation
roller cover back until you remove the separation roller, then
gently lower the roller cover back in place.
5.
Manually rotate and wipe the separation roller tires with a roller cleaning
pad. For best results wipe parallel to the ribs in order to remove any
residue between the ribs.
6.
Inspect the tires. If the tires show signs of wear or damage, replace the
separation roller. See “Replacement procedures” later in this chapter.
7.
Reinstall the separation roller by aligning the slots on the separation roller
with the holders.