Konica Minolta Kodak i4200 Plus User Guide - Page 50

Replacing the separation roller or separation roller tires, replace the separation roller tires

Get Konica Minolta Kodak i4200 Plus PDF manuals and user guides View all Konica Minolta Kodak i4200 Plus manuals
Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

Replacing the separation roller or separation roller tires 1. Open the scanner cover. 2. Pull the separation roller cover forward and remove the separation roller. NOTE: The separation roller cover is spring-loaded. Hold the separation roller cover back until you remove the separation roller, then gently lower the roller cover back in place. If you want to replace the separation roller, do Steps 3 and 4. If you want to replace the separation roller tires, go to Step 5. 3. Insert the new separation roller. Be sure to line up the slots on the separation roller with the holders. 4. Release the separation roller cover back in place and close the scanner cover. 44 A-61651 September 2016

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
44
A-61651
September 2016
Replacing the separation
roller or separation roller
tires
1.
Open the scanner cover.
2.
Pull the separation roller cover forward and remove the separation roller.
NOTE:
The separation roller cover is spring-loaded. Hold the separation
roller cover back until you remove the separation roller, then
gently lower the roller cover back in place.
If you want to replace the separation roller, do Steps 3 and 4. If you want to
replace the separation roller tires, go to Step 5.
3.
Insert the new separation roller. Be sure to line up the slots on the
separation roller with the holders.
4.
Release the separation roller cover back in place and close the scanner
cover.