Konica Minolta Kodak i4200 Plus User Guide - Page 45

Lower imaging guide, Wipe the imaging guide again with an almost-dry Staticide wipe to remove

Get Konica Minolta Kodak i4200 Plus PDF manuals and user guides View all Konica Minolta Kodak i4200 Plus manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Lower imaging guide 7. Turn the screw to the left on each end of the lower imaging guide and remove it from its position. Set the imaging guide aside. 8. Carefully vacuum the area between the LEDs. IMPORTANT: Avoid contact with the LEDs, as contact could cause damage. Do not insert any objects into the area between the upper LED strips, as you may damage the reflective mirrors in the scan module on the illumination system. 9. Clean both the top and bottom of the lower imaging guide thoroughly with a Staticide wipe. 10. Wipe the imaging guide again with an almost-dry Staticide wipe to remove any streaks. 11. Reinstall the lower imaging guide. 12. Close the scanner cover. 13. When finished with all cleaning procedures, turn on the scanner. A-61651 September 2016 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
A-61651
September 2016
39
Lower imaging guide
7.
Turn the screw to the left on each end of the lower imaging guide and
remove it from its position. Set the imaging guide aside.
8.
Carefully vacuum the area between the LEDs.
IMPORTANT:
Avoid contact with the LEDs, as contact could cause
damage. Do not insert any objects into the area between the
upper LED strips, as you may damage the reflective mirrors
in the scan module on the illumination system.
9.
Clean both the top and bottom of the lower imaging guide thoroughly with a
Staticide wipe.
10. Wipe the imaging guide again with an almost-dry Staticide wipe to remove
any streaks.
11. Reinstall the lower imaging guide.
12. Close the scanner cover.
13. When finished with all cleaning procedures, turn on the scanner.