Konica Minolta bizhub 4000P bizhub 4000P/4700P User Guide - Page 92
Network/Ports menu, Active NIC menu, Standard Network menus
View all Konica Minolta bizhub 4000P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
User's Guide Network/Ports menu Active NIC menu Use To Active NIC Notes: Auto • [list of available network cards] • Auto is the factory default setting. This menu item appears only when an optional network card is installed. Standard Network menus Note: Only active ports appear in this menu. All inactive ports are omitted. Use To PCL SmartSwitch On Off Set the printer to automatically switch to PCL emulation when a print job requires it, regardless of the default printer language. Notes: • On is the factory default setting. • When Off is used, the printer does not examine incoming data. The printer uses PostScript emulation if PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PS SmartSwitch is set to Off. PS SmartSwitch On Off Set the printer to automatically switch to PS emulation when a print job requires it, regardless of the default printer language. Notes: • On is the factory default setting. • When Off is used, the printer does not examine incoming data. The printer uses PCL emulation if PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PCL SmartSwitch is set to Off. NPA Mode Off Auto Set the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol. Notes: • Auto is the factory default setting. • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated. - 92 -