Konica Minolta bizhub C25 bizhub C25 Reference Guide - Page 127
To start Network Utility, click [Select scanner].
View all Konica Minolta bizhub C25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
3 If a network connection with a device could not be established, the fol- lowing message appears. To start Network Utility, click [Select scanner]. To exit the TWAIN driver without starting Network Utility, click [Cancel]. 4 After Network Utility is started, it automatically searches for devices on the network, then displays the devices in the [Select IP address from connected devices] list. Click [OK] to apply the IP address of the device and exit Network Utility. Click [Cancel] to exit Network Utility without applying the IP address of the device. d To directly specify the IP address of the device, select [Specify IP address]. The numbers (123456789) and period (.) are the only characters that can be entered to specify an IPv4 address. In addition, the lowercase letters (abcdefghijklmnopqrstuvwxyz), numbers (123456789) and period (.) are the only characters that can be entered to specify an IPv6 address. 1-102 Scanning From a Computer Application