Konica Minolta bizhub C25 bizhub C25 Reference Guide - Page 468

Item [Access Refuse Address] Description If [Enable] is selected, the range of IP addresses refused access to the printer can be specified. A maximum of five ranges of refused IP addresses can be specified. If [Disable] is selected, the refused access setting is disabled. Choices: [Enable], [Disable] Default: [Disable] Configuration Menu Equivalent: [UTILITY] - [ADMIN. MANAGEMENT] - [NETWORK SETTING] - [IP ADDR. FILTER] - [ACCESS REFUSE] [Range of IP address refused access*] Specify the range of IP addresses refused access to the printer. Type the IP address at the beginning of the range into the box on the left, and the IP address at the end of the range into the box on the right. Range: 0-255 for each xxx triplet Default: [0.0.0.0] d To specify a single IP address, type the same IP address into both the box for the starting IP address and for the ending IP address, or type [0.0.0.0] into the box for either the starting IP address or the ending IP address. d If the starting IP address is larger than the ending IP address, the setting is not applied. [Apply] button Applies the configuration settings in this page. [Clear] button Resets all configuration settings to previous values. * Always enter these addresses without leading zeros. For example, 131.011.010.001 should be entered as 131.11.10.1. Configuring the Printer 9-185