Konica Minolta bizhub C25 bizhub C25 Reference Guide - Page 266
Making the printer driver known from the Network window
View all Konica Minolta bizhub C25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 266 highlights
Making the printer driver known from the Network window To use Web service print in Windows Vista/7/Server 2008/Server 2008 R2, install the printer driver before making it known to the computer with plug and play. 1 Install the printer driver for this machine. Install the printer driver using the installer or Add Printer Wizard. The printer driver can be installed in any port. 2 Turn on the power of the machine while it is connected to the network. - Since the printer is searched for, be sure to connect the machine to the network. 3 To use the Web service print, check that [Network discovery] is enabled in [Network and Sharing Center] on the computer. 4 Open the [Network] window. - In Windows Vista/Server 2008, click [Start], and [Network]. - In Windows 7/Server 2008 R2, open [Computer] and click [Network]. If [Network] is not displayed in [Computer], click the [Network and Internet] category on the [Control Panel], and also click [View network computers and devices]. Connected computers and devices are detected. 5 Select the device name of the machine, and then click [Install] on the toolbar. The printer driver for this machine is detected and the machine is ready to print. 6 After finishing the installation, make sure that the icon for the installed printer is displayed in the [Printers] or [Devices and Printers] window. d If the printer driver is not correctly installed, the driver must be updated using [Update Driver ...]. For details, refer to "Updating the driver after connecting this machine" on page 8-33. d In Windows Vista/Server 2008, you can continue the task and specify the printer driver installation disk to install the printer driver if it is not installed in advance. When the [Found New Hardware] window appears, follow the displayed messages to perform the procedure. For details, refer to "Adding a printer from the Network window" on page 8-24. d In Windows 7/Server 2008 R2, you cannot specify the installation disk after the machine is connected to the computer. Install the printer driver in advance (Step 1). Network Printing 8-23