Konica Minolta bizhub C25 bizhub C25 Reference Guide - Page 146
Printer Driver Settings, Options Installed, General
View all Konica Minolta bizhub C25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Printer Driver Settings Options Installed Parameters [Paper Source Unit] [Storage] [Duplex Unit] [Printer Memory] Settings Select Unit 3 if an optional lower feeder unit for the printer has been installed. - The default setting is [Disabled]. Select [None], [CF(1GB Over)] or [HDD] for the storage unit that is installed. - The default setting is [None]. Select the setting for the duplex unit. - The default setting is [Enabled]. Select [256 MB] or [768 MB] if an optional memory for the printer has been installed. - The default setting is [256 MB]. General Parameters [Paper Type] [Paper Source] [Manually Print on 2nd side] [Paper Sizes] Settings Specifies the paper type as [Auto], [Plain Paper], [Recycled], [Glossy1 (100 - 128g/ m2)], [Glossy 2 (129 - 158g/m2)], [Label], [Thick 1 (91 - 150g/m2)], [Thick 2 (151 - 210g/ m2)], [Letterhead], [Envelope], [Postcard], [Single Side Only (60 - 90g/m2)], or [Special Paper (60 - 90g/m2)]. - The default setting is [Auto]. Specifies the paper source as [Tray 1], [Tray 2], [Tray 3], [Tray 1 (Manual Feed)], or [Auto]. - The default setting is [Tray 1]. Select whether or not to print on the back side of paper that has already been printed on. - The default setting is [Off]. Specifies the paper size. An irregular paper size cannot be selected. Specifying Printer Driver Settings 2-13