Konica Minolta bizhub C287 bizhub C287/C227 Quick Start Guide - Page 235
Registered Paper Size], Start, Original Glass, Settings, Description
View all Konica Minolta bizhub C287 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 235 highlights
5 Copy 5.4 5 Tap [ON], then configure each item so that it corresponds with the finishing image. Frequently Asked Questions Chapter 5 Settings [Original Size] [Registered Paper Size] [Layout] [Zoom] [Full Size] [x1.0] Description Enter the size of a card to be copied. Alternatively, you can recall the preregistered size from [Registered Paper Size]. After you have entered the size, select a key in [Registered Paper Size], and tap [Register]. Then the size you have entered is registered in the memory. Displays the sizes registered in memory. When you call a registered size from the memory, tap the key of the desired registration name, then tap [Recall]. To change a registration name, select a desired key, then tap [Change registered size name]. Select how to arrange the front and back sides of a card on paper. Copy the card by enlarging it according to the paper size. Copy the card to the same size as the original (card). 6 Tap [OK]. 7 Press the Start key. The front side of the card is scanned. 8 Turn the card over, and place it on the Original Glass. 9 Press the Start key. 10 After both sides of the card have been scanned, tap [Finish]. 5-42 11 Press the Start key to start to copy the scanned card. bizhub C287/C227