Home » Konica Minolta Manuals » Printers » Konica Minolta magicolor 1690MF » Manual Viewer

Konica Minolta magicolor 1690MF Service Manual - Page 109

Machine specifications

View all Konica Minolta magicolor 1690MF manuals

Add to My Manuals
Save this manual to your list of manuals

Page 109 highlights

1. Product Specifications Theory of Operation Ver. 1.0 Nov. 2008 Auto Document Feeder Unit OUTLINE E. Paper feed prohibited originals • The following types of originals should not be used. Types of document Possible malfunctions Original that is stapled or clipped. Feed failure, damage to the original, or drive failure due to clip clogging Pasted originals Misfeed, broken original, or folded paste-up edges Book original Feed failure, damage to the original, or drive failure Original weighing less than 35 g/m2 or 210 g/m2 or more Feed failure Torn original Feed failure, damaged sheet Highly curled original (15 mm or more) Original misfeed due to dog-ear or skew OHP transparencies Feed failure Label Sheet Feed failure Photographic paper, gloss enamel paper, or other gloss Feed failure, damage to the original, or drive original failure Offset master Feed failure Sheets clipped or notched Damaged sheet Less-than-0.05-mm-thick thin paper Misfeed More-than-0.15-mm-thick thin paper Misfeed F. Paper feed not guaranteed originals • If fed, paper feed will be possible to some extent but trouble occurrence will be possible. Type of original Possible trouble Sheets lightly curled (Curled amount: 10 - 15 mm) Dog-eared, exit failure Heat sensitive paper Edge folded, exit failure, transport failure Translucent paper Take-up failure, transport failure Paper immediately after paper exit from the main unit Take-up failure, transport failure Paper with many punched holes (e.g., loose leaf) limited to vertical feeding Multi-page feed due to flashes from holes Sheets with 2 to 4 holes Transport failure Sheets two-folded or Z-folded Transport failure, image deformation Sheets folded Image deformation, multi-page feed, take-up failure G. Machine specifications Power requirements Dimensions Weight DC 24 V (supplied from the main body) DC 5 V (supplied from the main body) 404 mm (W) x 318 mm (D) x 60.5 mm (H) (without the original tray) 2.0 kg H. Operating • Conforms to the operating environment of the main body. NOTE These specifications are subject to change without notice. 2

Section	Page
SAFETY AND IMPORTANT WARNING ITEMS	4
IMPORTANT NOTICE	4
DESCRIPTION ITEMS FOR DANGER, WARNING AND CAUTION	4
SAFETY WARNINGS	5
4.1 Internal Laser Radiation	16
4.2 Laser Safety Label	19
4.3 Laser Caution Label	20
4.4 PRECAUTIONS FOR HANDLING THE LASER EQUIPMENT	20
SAFETY INFORMATION	21
IMPORTANT NOTICE	21
INDICATION OF WARNING ON THE MACHINE	22
MEASURES TO TAKE IN CASE OF AN ACCIDENT	25
Composition of the service manual	26
Notation of the service manual	27
magicolor 1680MF/magicolor 1690MF Main body	28
CONTENTS	30
OUTLINE	34
1. System configuration	34
2. Product specifications	35
3. Center cross section	39
4. Media path	40
COMPOSITION/OPERATION	42
5. Overall composition	42
5.1 Control block diagram	42
5.2 Image creation process	43
5.3 Operation sequence	44
6. Interface section	45
6.1 Composition	45
6.1.1 magicolor 1680MF	45
6.1.2 magicolor 1690MF	46
7. Scanner section	47
7.1 Composition	47
7.2 Drive	48
7.3 Operation	49
7.3.1 When the Start key is pressed	49
7.3.2 Home position detection	50
7.3.3 Shading compensation	50
8. Write section (PH section)	51
8.1 Composition	51
8.2 Operation	52
8.2.1 Outline	52
8.2.2 Laser exposure process	52
8.2.3 Laser emission area	53
8.2.4 Image stabilization control item	53
9. Imageing cartridge section	54
9.1 Composition	54
9.2 Drive	55
9.3 Operation	55
9.3.1 Imaging cartridge (IC) life control	55
10. Photo conductor section	56
10.1 Composition	56
10.2 Drive	56
10.3 Operation	57
10.3.1 Photo conductor drive mechanism	57
10.3.2 Photo conductor cleaning mechanism	57
11. Charge corona section	58
11.1 Composition	58
11.2 Operation	58
11.2.1 Charge corona control	58
12. Developing section	59
12.1 Composition	59
12.2 Drive	60
12.3 Operation	60
12.3.1 Toner flow	60
12.3.2 Toner Cartridge Rack	61
12.3.3 Developing Roller drive	67
12.3.4 Developing bias	67
12.3.5 Developing system	68
12.3.6 Toner cartridge (TC) life control	68
13. 1st transfer section	69
13.1 Composition	69
13.2 Drive	70
13.3 Operation	71
13.3.1 1st transfer output control	71
13.3.2 Transfer belt cleaning mechanism	71
13.3.3 Cleaning blade pressure/retraction mechanism	72
13.3.4 Belt Positioning Sensor	75
13.3.5 ATVC (Auto transfer voltage control)	76
13.3.6 Image stabilization control item	77
14. 2nd transfer section/ media separation	78
14.1 Composition	78
14.2 Drive	79
14.3 Operation	80
14.3.1 2nd transfer roller pressure/retraction control	80
14.3.2 2nd transfer roller cleaning	81
14.3.3 Neutralization and separation of media	82
15. Toner collecting section	83
15.1 Composition	83
15.2 Drive	83
15.3 Operation	84
15.3.1 Toner collecting mechanism	84
15.3.2 Waste toner near full detection system	85
16. Media feed section	86
16.1 Composition	86
16.2 Drive	87
16.3 Operation	88
16.3.1 Up/down control	88
16.3.2 Paper feed control	89
16.3.3 Double feed prevention mechanism	89
16.3.4 Remaining media detection control	89
16.3.5 Media feed retry function	90
17. Fusing section	91
17.1 Composition	91
17.2 Drive	92
17.3 Operation	93
17.3.1 Fusing temperature control	93
17.3.2 Wait control	94
17.3.3 Print control	94
17.3.4 Protection against abnormally high temperature	95
17.3.5 PPM control	95
18. Media exit section	96
18.1 Composition	96
18.2 Drive	97
18.3 Operation	97
18.3.1 Conveyance control	97
18.3.2 Media exit full detection control	97
19. Image stabilization control	98
19.1 Overview	98
19.2 Operation	99
19.2.1 Leak detection control	99
19.2.2 IDC sensor LED intensity control	99
19.2.3 Transfer belt surface correction control	99
19.2.4 Control of the maximum amount of toner sticking	99
19.2.5 Laser intensity adjustment control	99
19.2.6 g correction control	99
19.3 Operation timing	100
19.4 Operation flow	100
20. Fan control	101
20.1 Composition	101
20.2 Operation	101
20.2.1 Function	101
20.2.2 Control conditions	102
Auto document feeder unit	104
CONTENTS	106
OUTLINE	108
1. Product Specifications	108
COMPOSITION/OPERATION	110
2. Composition	110
3. Drive	111
4. Mechanical operations	112
4.1 Document feed mechanism	112
4.1.1 Document separation mechanism	113
4.2 Document transport/exit mechanism	114
4.2.1 Document transport mechanism	114
4.2.2 Document exit mechanism	115
Lower Feeder Unit	116
CONTENTS	118
OUTLINE	120
1. Product specifications	120
1.1 Type	120
1.2 Paper type	120
1.3 Machine specifications	120
1.4 Operating environment	120
Composition/Drive	122
2. Composition	122
3. Drive	123
4. Drive	124
4.1 Conveyance drive mechanism	124
4.2 Media Empty Detection	125
Duplex Option	126
CONTENTS	128
OUTLINE	130
1. Product specifications	130
COMPOSITION/OPERATION	132
2. Composition	132
2.1 Duplex option	132
2.2 Attachment	133
3. Drive	134
3.1 Duplex option	134
3.2 Attachment	134
4. Operations	135
4.1 Switchback mechanism	135
4.1.1 Switchback operation	135
4.1.2 Exit roller drive coupling mechanism	135
4.1.3 Switchback Motor Control	136
4.2 Transport and duplex media take-up mechanism	137
4.2.1 Transport and duplex media take-up operation	137
4.2.2 Duplex init transport motor control	137
4.2.3 Media path during take-up of media from the duplex option	137
4.2.4 Loop correction control	138
4.3 Fan control	138
4.3.1 Composition	138
4.3.2 Operation	138
4.3.3 Control condition	138
4.4 2-sided printing method	139
4.4.1 Operations in 2-sided printing with a single sheet of media resident in the system	139

Match case Limit results 1 per page

1. Product Specifications

Theory of Operation

er. 1.0

ov. 200

OUTLINE

Auto Document

Feeder Unit

Paper feed prohibited originals

•

The following types of originals should not be used.

Paper feed not guaranteed originals

•

If fed, paper feed will be possible to some extent but trouble occurrence will be possible.

Machine specifications

Operating

•

Conforms to the operating environment of the main body.

NOTE

These specifications are subject to change without notice.

Types of document

Possible malfunctions

Original that is stapled or clipped.

Feed failure, damage to the original, or drive

failure due to clip clogging

Pasted originals

Misfeed, broken original, or folded paste-up

edges

Book original

Feed failure, damage to the original, or drive

failure

Original weighing less than 35 g/m

210 g/m

or more

Feed failure

Torn original

Feed failure, damaged sheet

Highly curled original (15 mm or more)

Original misfeed due to dog-ear or skew

OHP transparencies

Feed failure

Label Sheet

Feed failure

Photographic paper, gloss enamel paper, or other gloss

original

Feed failure, damage to the original, or drive

failure

Offset master

Feed failure

Sheets clipped or notched

Damaged sheet

Less-than-0.05-mm-thick thin paper

Misfeed

More-than-0.15-mm-thick thin paper

Misfeed

Type of original

Possible trouble

Sheets lightly curled (Curled amount: 10 - 15 mm)

Dog-eared, exit failure

Heat sensitive paper

Edge folded, exit failure, transport failure

Translucent paper

Take-up failure, transport failure

Paper immediately after paper exit from the main unit

Take-up failure, transport failure

Paper with many punched holes (e.g., loose leaf) limited

to vertical feeding

Multi-page feed due to flashes from holes

Sheets with 2 to 4 holes

Transport failure

Sheets two-folded or Z-folded

Transport failure, image deformation

Sheets folded

Image deformation, multi-page feed, take-up

failure

Power requirements

DC 24

(supplied from the main body)

DC 5

(supplied from the main body)

Dimensions

404 mm (W) x 31

mm (D) x 60.5 mm (H) (without the original tray)

Weight

2.0 kg