Kyocera ECOSYS M3655idn M3655idn/M3660idn Operation Guide - Page 318
Wired Network Settings, IMPORTANT, After changing the setting
View all Kyocera ECOSYS M3655idn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 318 highlights
Setup and Registration (System Menu) > System Menu Item IPv6 IPv6 Manual Setting RA (Stateless) DHCP Restart Network Description Set up TCP/IP (IPv6) to connect to the network. This setting is available when [TCP/IP] is [On]. Select whether to use IPv6. Value: Off, On NOTE Selecting [On] displays IP address in [IP Address (Link Local)] after restarting the network. Manually specify the IP address, prefix length, and gateway address of TCP/IP (IPv6). Value IP Address (Manual): 128-bits address is expressed in eight groups consisting of fourdigit hexadecimal digits. The groups are separated by colon (:). Prefix Length: 0 to 128 Default Gateway: 128-bits address is expressed in eight groups consisting of fourdigit hexadecimal digits. The groups are separated by colon (:). NOTE • This function is displayed when [IPv6] is set to [On]. • To enter "Default Gateway", set [RA (Stateless)] to [Off]. Select whether to use RA (Stateless). Value: Off, On NOTE • This function is displayed when [IPv6] is set to [On]. • Selecting [On] displays IP address in [IP Address (Stateless)] after restarting the network. Select whether to use the DHCP (IPv6) server. Value: Off, On NOTE • This function is displayed when [IPv6] is set to [On]. • Selecting [On] displays IP address in [IP Address (Stateful)] after restarting the network. Restarts the network. IMPORTANT After changing the setting, restart the network or turn the machine OFF and then ON. Wired Network Settings Configure wired network settings. Item TCP/IP Settings LAN Interface Description For details on setting value. TCP/IP Setting (page 8-29) Specify the settings for the LAN interface to be used. Value: Auto, 10Base-Half, 10Base-Full, 100Base-Half, 100Base-Full, 1000BASE-T IMPORTANT After changing the setting, restart the network or turn the machine OFF and then ON. 8-30