Kyocera ECOSYS M3655idn M3655idn/M3660idn Operation Guide - Page 86
Configuring the Connection by Using Push Button, Home] key > [Wi-Fi Direct]
View all Kyocera ECOSYS M3655idn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Installing and Setting up the Machine > Network Setup Configuring the Connection by Using Push Button When your computer or handheld device does not support Wi-Fi Direct but supports WPS, you can configure the network using push button. 1 Display the screen. [System Menu/Counter] key > [System/Network] > [Network] > [Wi-Fi Direct Settings] > [Wi-Fi Direct] 2 Configure the settings. [On] > [OK] 3 Restart the network. [System Menu/Counter] key > [System/Network] > [Network] > [Restart Network] > [Yes] 4 [Home] key > [Wi-Fi Direct] 5 Press the push button on the computer or handheld device and select [Push Button] on the screen of operation panel simultaneously. The network between this machine and the computer or handheld device is configured. IMPORTANT You can connect up to three handheld devices at the same time using Wi-Fi Direct setting. When the devices that support Wi-Fi Direct are connected, if you want to connect other device, disconnect the alreadyconnected devices from the network. The disconnection methods are as follows: • Disconnect the network from the computer or handheld computer • Disconnecting all devices from the network on the operation panel Select [Home] key > [Wi-Fi Direct] > [Connected Device List] > [Disconnect All] • Configuring auto disconnecting time from the System menu Wi-Fi Settings (page 8-27) • Configuring auto disconnecting time from the Command Center RX Command Center RX User Guide 2-32