Kyocera ECOSYS M3655idn M3655idn/M3660idn Operation Guide - Page 327
When Network Authentication is set to [Open] or [Shared], Basic
View all Kyocera ECOSYS M3655idn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 327 highlights
Setup and Registration (System Menu) > System Menu Item Description Custom Setup Network Name (SSID) The detailed settings for wireless LAN can be changed. Set the SSID (Service Set Identifier) of the wireless LAN to which the machine connects. NOTE Up to 32 characters can be entered. Connection Mode Set the connection mode. Value: Ad Hoc, Infrastructure NOTE Ad Hoc: Directly communicates with the device without going through an access point. This method cannot be used to connect to two or more devices. Infrastructure: Performs communication through an access point. Channel Set channel. Use [-] / [+] or the numeric keys to enter a number. Value: 1 to 11 Network Authentication Select network authentication type. To select other options, open the device home page from a computer. Value: Open, Shared, WPA-PSK*1, WPA2-PSK*1 Encryption Select encryption method. If the option other than [Disable] is selected, enter the WEP key or the Preshared key. The setting values vary depending on the Network Authentication setting. Select [Data Encryption]. When Network Authentication is set to [Open] or [Shared]: Value: Disable, WEP When Network Authentication is set to [WPA-PSK] or [WPA2-PSK]: Value: TKIP*2, AES, Auto*2, Preshared Key NOTE • If [WEP] is selected, enter the WEP key. Up to 26 characters can be entered. • If [TKIP], [AES] or [Auto] is selected, enter the Preshared key. Enter the value in 8 to 63 characters. *1 Not displayed if you selected [Ad Hoc] for "Connection Mode". *2 Not displayed if you selected [WPA2-PSK] for "Network Authentication". Basic Configure settings for the optional Network Interface Kit. NOTE This menu is displayed when the optional Network Interface Kit or Wireless Network Interface Kit is installed. Item Host Name TCP/IP Settings Description Check the host name of the machine. Host name can be changed from Command Center RX. Changing Device Information (page 2-57) For details on setting value. TCP/IP Setting (page 8-29) Bonjour (page 8-31) IPSec (page 8-31) 8-39