Kyocera KM-8530 KM-8530 Operation Guide - Page 120
Interrupt Copying continued
![]() |
View all Kyocera KM-8530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Interrupt Copying (continued) 2. Set copy conditions, as desired. The initial settings in Interrupt mode are as follows. Copy Mode : 1a1 RADF : ON AES : ON Lens Mode : 1.00 (100%) APS : ON Print Quantity : 1 Finisher : Main Tray in Sort mode DETAILS Remove any document from the platen glass or from the document feeder, if present. 3. Position original(s). HINT See p. 3-2 to p. 3-6 for details on positioning originals. 4. Press [START] to start the interrupt copying. DETAILS When [CHECK] is pressed during Interrupt copying, the information displayed reflects the initial copy job settings. Check mode will not display Interrupt copy job information. 5. When Interrupt copying is completed, press [INTERRUPT] again. The [INTERRUPT] LED turns out and the INTERRUPT indicator on the Basic Screen returns to the JOB indicators. The settings of the initial job will be restored on the Basic Screen. 6. Press [START] to resume copying. CAUTION When the finisher / trimmer unit / paper exit tray capacity is exceeded due to the print quantity selected, remove the copied sets as they exit; otherwise, mishandled paper will occur. 3-58
![](/manual_guide/products/kyocera-km8530-km8530-operation-guide-3918ba1/120.png)