Kyocera KM-8530 KM-8530 Operation Guide - Page 352
[2] Copier Initial Setting
![]() |
View all Kyocera KM-8530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 352 highlights
[2] Copier Initial Setting Initial settings are the settings that display automatically when the copier is powered on, when Auto/Reset timer is operated, or when [AUTO RESET] key is pressed. These settings can be changed by the Key Operator, as shown in this section. Initially (i.e., at installation), the Basic Screen displays the following conditions to meet Energy Star requirements: Initial Setting Copy Mode Copy Density Lens Mode Paper Tray Output Mode : 1-1 : AES : 1:1 : APS : offset sort When Initial settings are changed by the Key Operator, the new initial settings display when the copier is powered on, when Auto/Reset timer is reached, or when [AUTO RESET] key is pressed. The following initial settings can be changed by the Key Operator: Copy mode : [RADF; 1-1; 1-2; 2-2; 2-1] Copy density : [AES; manual] Lens mode : [AMS; ratio 0.25~4.00] Paper tray : [APS; trays 1, 2, 3, or LCT] Output mode : [Non-sort; Sort, Group; Staple-sort; Stapling&Folding; Folding; Punch; Trimming; Cover sheet] Special original : [Original Direction; Text/Photo Enhance; Special Original; Original Form] Rotation : OFF Setting procedures are described on the following pages. NOTE: The most commonly-used settings are established at installation. Before changing any of the copier settings, be sure that you understand the overall and long-range effect of the change. 13-10
![](/manual_guide/products/kyocera-km8530-km8530-operation-guide-3918ba1/352.png)