Kyocera KM-8530 KM-8530 Operation Guide - Page 89

Making Double-Sided Copies (1a2, 2a2) (continued) 5. Select additional copy conditions, as desired. DETAILS Some incompatible conditions may automatically release the selected copy mode. In this case, arrange the settings so that they are compatible with the selected copy mode. 6. Enter the desired print quantity from the control panel keypad. HINT See p. 3-7 for details on setting print quantity. 3 Copying Operations Positioning Originals Setting Print Quantity 7. Press [START] to scan. Set Job During Warmup The front side image of the double-sided copy will be scanned into memory. Stop 8. Scan/Print Replace the original on the platen glass with the back side image original, then press [START]. Copy Size DETAILS Repeat this step until all originals are scanned. Memory indicator on the upper right of the Basic Screen allows you to check the remaining memory. To delete the scanned data without printing, press [STOP], then touch CANCEL on the popup menu to be sure the data is deleted. 9. Touch STORE to exit the Store mode. STORE will return to the normal display. 10. Press [START] to print. All the data in memory will be output. Press [STOP] to suspend the printing job. CAUTION When the finisher / trimmer unit / paper exit tray capacity is exceeded due to the print quantity selected, remove the copied sets as they exit; otherwise, mishandled paper will occur. Lens Mode Density 1-1, 2-2 2-1 Multi-Sheet Bypass Tray Using Memory Output without Finisher DF-630/635 Output Modes Binding Mode Recalling Previous Job Check Mode & Proof Copy Interrupt Mode 3-27