Kyocera KM-8530 KM-8530 Operation Guide - Page 165
Punching File Holes in Copies (Punch
![]() |
View all Kyocera KM-8530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Punching File Holes in Copies (Punch) The Punch mode is available only when the PU-108 Punching unit or PZ-108 Punching/Z-Folding unit option is installed on the DF-630/DF-635 Finisher. When the Punch mode is selected in combination with any of the Primary (Main) tray output modes, each copied sheet is punched and output to the Primary tray according to the selected output mode. DETAILS • Some staple positions previously selected may conflict with this function. • Special size paper (STD size (special), Non STD size, Wide size) cannot be punched. • The LCT specified as Thick 3 cannot be used. • If the ATS (Automatic Tray Switching) functions while the machine uses the Punch mode, the punch holes may be slightly off the appropriate positions. Reminder! • Do not punch special paper type such as transparent films, labels, tabbed sheets, etc. Otherwise, machine trouble may occur in Punching unit. • Be sure that the side guide plates of the paper tray are securely aligned to the paper; otherwise the copies may not be punched in position. >>>Specifications for Punch Mode
![](/manual_guide/products/kyocera-km8530-km8530-operation-guide-3918ba1/165.png)