Kyocera TASKalfa 406ci 356ci/406ci Operation Guide Rev. 2015.11 - Page 191

Operation on the Machine > Program Registering Programs Use the procedure below to register a program. The following procedure is an example of registering the copying function. 1 Display the screen. 1 [Home] key > [Copy] 2 Select the [Program] tab while the copy mode is accessed. 2 Register the program. 1 [Add] > Select a number (01 to 50) for the program number > [Next] NOTE If you select a program number already registered, the currently registered functions can be replaced with a new set of functions. 2 Enter the new program name > [Save] The program is registered. To display a registered program on the Home screen, select [Yes] on the confirmation screen that appears, proceed to step 2-3. 3 Specify the position in which you want to display the icon of registered program. 4 Select [Save]. Recalling Programs Use the procedure below to recall a registered program. 1 Recall the program. 1 Select [Program] in the Home screen, or the key of the registered program. Selecting the key of the registered program will recall the program. If you selected [Program], proceed to step 1-2. 2 Select the key for the program number you want to recall. Select the [Quick No. Search] key or [No.] to enter the program number (01 to 50) directly for recalling. NOTE If the program cannot be recalled, the Document Box or the form overlay specified in the program might have been deleted. Check the Document Box. 2 Execute the program. Place the originals > [Start] key NOTE [Program] can be pressed in each function to call up the program registered for the function. 5-10