Kyocera TASKalfa 406ci 356ci/406ci Operation Guide Rev. 2015.11 - Page 194

Operation on the Machine > Application 4 Select [Yes]. Installation of the application begins. Depending on the application being installed, the installation may take some time. Once the installation ends, the original screen reappears. NOTE • To install another application, repeat steps 2-3 and 2-4. • To remove the removable memory, select [Remove Memory] and wait until the message "Removable Memory can be safely removed." appears. Then remove the removable memory. Activating Applications The procedure is as follows. 1 Display the screen. [System Menu] key > [Application] NOTE If the user authentication screen appears, enter your login user name and login password and select [Login]. For this, you need to login with administrator privileges. The factory default login user name and login password are set as shown below. Model Name TASKalfa 356ci TASKalfa 406ci Login User Name 3500 4000 Login Password 3500 4000 2 Activate the application. 1 Select the desired application > [Activate] You can view detailed information on the selected application by selecting [Detail]. 2 Enter the license key > [Official] Some applications do not require you to enter a license key. If the license key entry screen does not appear, go to step 3-3. To use the application as a trial, select [Trial] without entering the license key. 3 Select [Yes]. IMPORTANT If you change the date/time while using the trial version of an application, you will no longer be able to use the application. 4 Select the application icon in the Home screen. Select the application icon. The application will start up. 5-13