LG 43SL5B Owners Manual - Page 75
Power Command: k a, Select input Command: x b, Aspect ratio Command: k c, Energy saving Command: j q
View all LG 43SL5B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
ENGLISH 01. Power (Command: k a) Controls the power on/off of the set. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00: Off 01: On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] * Only when the monitor is fully powered on, the acknowledgement signal is returned properly. * There may be a delay between the transmission and acknowledgement signals. TO CONTROL MULTIPLE PRODUCTS 75 04. Energy saving (Command: j q) Sets the energy saving function. Transmission [j][q][ ][Set ID][ ][Data][Cr] Data 00: Off 01: Minimum 02: Medium 03: Maximum 04: Automatic 05: Screen off Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x] ** This may not be supported on some models. 02. Select input (Command: x b) Selects an input signal. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data 60: RGB 70: DVI-D (PC) 80: DVI-D (DTV) 90: HDMI (HDMI1) (DTV) 91: OPS (DTV) A0: HDMI (HDMI1) (PC) A1: OPS (PC) C0: DISPLAYPORT (DTV) D0: DISPLAYPORT (PC) Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x] * Some input signals may not be supported on some models. 05. Picture mode (Command: d x) Selects a picture mode. Transmission [d][x][ ][Set ID][ ][Data][Cr] Data 00: Vivid 01: Standard 02: Cinema 03: Sport 04: Game 05: Expert 1 06: Expert 2 08: Eco 11 : Calibration Acknowledgement [x][ ][Set ID][ ][OK/NG][Data][x] 03. Aspect ratio (Command: k c) Adjusts the aspect ratio. Transmission [k][c][ ][Set ID][ ][Data][Cr] Data 01: 4:3 02: 16:9 04: Zoom (HDMI)(DTV) 06: Auto ratio (HDMI)(DTV) 09: Original (≥ 720p) (HDMI) (DTV) 10 to 1F: Cinema zoom 1 to 16 (HDMI) (DTV) * Available data types differ depending on the input signal. For more information, see the aspect ratio section of the owner's manual. * The aspect ratio may differ depending on the model's input configuration. Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x] 06. Contrast (Command: k g) Adjusts the screen contrast. Transmission [k][g][ ][Set ID][ ][Data][Cr] Data 00 to 64: Contrast 0 to 100 Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]