LG 43SL5B Owners Manual - Page 81

n][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x], Software version Command: f z

Get LG 43SL5B PDF manuals and user guides View all LG 43SL5B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 81 highlights

ENGLISH 30. Reset (Command: f k) Resets settings for Picture, Screen and Audio or restores factory settings. (Screen reset can only be performed in RGB input mode.) Transmission [f ][k][ ][Set ID][ ][Data][Cr] Data 00: Picture reset 01: Screen reset 02: Initial settings (factory reset) Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x] TO CONTROL MULTIPLE PRODUCTS 81 33. Time elapsed (Command: d l) Checks the elapsed time. Transmission [d][l][ ][Set ID][ ][Data][Cr] Data FF: Read status Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x] * The data received is shown as a hexadecimal value. 31. Current temperature (Command: d n) Checks the inside temperature value. Transmission [d][n][ ][Set ID][ ][Data][Cr] Data FF: Check status Acknowledgement [n][ ][Set ID][ ][OK/NG][Data][x] [n][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x] * Temperature is displayed as a hexadecimal value. 32. Key (Command: m c) Sends a key code for the IR remote control. Transmission [m][c][ ][Set ID][ ][Data][Cr] Data IR_KEY_CODE Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x] For key codes, see IR Codes. * Some key codes may not be supported on some models. 34. Product serial number (Command: f y) Checks the serial number of the product. Transmission [f ][y][ ][Set ID][ ][Data][Cr] Data FF: Check product serial number Acknowledgement [y][ ][Set ID][ ][OK/NG][Data][x] * Data is in ASCII code. 35. Software version (Command: f z) Checks the software version of the product. Transmission [f ][z][ ][Set ID][ ][Data][Cr] Data FF: Check software version Acknowledgement [z][ ][Set ID][ ][OK/NG][Data][x]

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
81
TO CONTROL MULTIPLE PRODUCTS
ENGLISH
30. Reset (Command: f k)
Resets settings for Picture, Screen and Audio or restores factory
settings.
(Screen reset can only be performed in RGB input mode.)
Transmission
[f][k][ ][Set ID][ ][Data][Cr]
Data
00: Picture reset
01: Screen reset
02: Initial settings (factory reset)
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
31. Current temperature (Command: d n)
Checks the inside temperature value.
Transmission
[d][n][ ][Set ID][ ][Data][Cr]
Data
FF: Check status
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
[n][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
* Temperature is displayed as a hexadecimal value.
32. Key (Command: m c)
Sends a key code for the IR remote control.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data
IR_KEY_CODE
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
For key codes, see IR Codes.
* Some key codes may not be supported on some models.
33. Time elapsed (Command: d l)
Checks the elapsed time.
Transmission
[d][l][ ][Set ID][ ][Data][Cr]
Data
FF: Read status
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
* The data received is shown as a hexadecimal value.
34. Product serial number (Command: f y)
Checks the serial number of the product.
Transmission
[f][y][ ][Set ID][ ][Data][Cr]
Data
FF: Check product serial number
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
* Data is in ASCII code.
35. Software version (Command: f z)
Checks the software version of the product.
Transmission
[f][z][ ][Set ID][ ][Data][Cr]
Data
FF: Check software version
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]