LG WT1501CW Owners Manual - English Spanish - Page 18

18 HOW TO USE TIME AND STATUS DISPLAY The time and status display shows the estimated time remaining and cycle progress. e $17.n Load Sensing Soak Wash Rinse Spin iu•uu B C A CYCLE STATUS INDICATOR These LEDs will illuminate when a cycle is selected to indicate which stages will run. When a cycle is running, the LED for the active stage will blink, and the LEDs for the remaining stages will remain steady. Once a stage is complete, the LED will turn off. If a cycle is paused, the active stage LED will stop blinking. B DELAY WASH INDICATOR The Delay Wash Indicator will illuminate when a delay wash is set. The indicator light will turn off once the cycle has started. C ESTIMATED TIME REMAINING When a cycle is selected, the default time for that cycle is displayed. This time will change as modifiers or options are selected. Once the START/PAUSE button is pressed, the washer will measure the size of the load. The estimated time may change once the load size has been measured. If Delay Wash is set, the remaining delay time counts down until the cycle begins. NOTE: The time shown is only an estimate. This time is based on normal operating conditions. Several external factors (load size, room temperature, incoming water temperature, etc.) can affect the actual time. D LID LOCK INDICATOR The Lid lock indicator will illuminate once a cycle has started. The indicator light will stay on until the cycle is paused, stopped or has finished.