Lacie d2 USB 3.0 User Manual - Page 9
Hard Disk Heat Management, Heat Dissipation Design, Upright, Stack & Rackmount Configuration
View all Lacie d2 USB 3.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
LaCie d2 USB 3.0 • Design by Neil Poulton User Manual 1.4. Hard Disk Heat Management Heat Dissipation Design The LaCie d2 USB 3.0's metal body is ideal for naturally dissipating internal drive heat. Its unique design actually draws heat away from the internal drive toward the external casing. The large surface area of the heat sink casing absorbs internal heat and dissipates it, keeping the drive safe and prolonging its life and reliability. As a consequence, it is normal that the external casing is warm to the touch. Please make sure that the vent on the back-bezel is not obstructed and that there is a natural airflow across the casing. Upright, Stack & Rackmount Configuration Heat dissipation is maximized when the d2 USB 3.0 is in the upright position. When stacking LaCie d2 USB 3.0s, please remember to attach the included rubber feet on the under side of your drives. This will allow for some airflow between your drives so that the heat dissipation can work effectively. CAUTION: To prevent overheating, do not stack more than three d2 USB 3.0 hard drives, especially if these drives are turned on simultaneously. Introduction page 9 Exclusive d2 Heat Sink Design Provides 60% more area for heat dissipation Heat Sink Design Standard Design