Lantronix EDS3000PS User Guide - Page 27

Installing the EDS3000PS Devices, Finding a Suitable Location

Get Lantronix EDS3000PS PDF manuals and user guides View all Lantronix EDS3000PS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

3: Installation of EDS3000PR/EDS3000PS Figure 3-9 Example of EDS3032PR Connections 10/100/1000 Base-T Ethernet Serial Device Power Installing the EDS3000PS Devices Finding a Suitable Location You can install the EDS3000PS device as a desktop unit or it can be mounted to existing wall brackets (not provided) using mounting holes located on the bottom of the EDSPS. If using AC power, avoid outlets controlled by a wall switch. Connecting the EDS3000PS Devices 1. Power off the serial devices that will be connected to the EDS3000PS device. 2. Attach a serial cable between the EDS3000PS device and your serial device. For a list of cables and adapters you can use with the EDS3000PS device, refer to Appendix D: Lantronix Cables and Adapters. 3. Connect an Ethernet cable between the EDS3000PS device Ethernet port and your Ethernet network. 4. Insert the power cord into the back of the EDS3000PS device. Plug the other end into an AC wall outlet. After power-up, the self-test begins. 5. Power up the serial devices. EDS3000 Device Server User Guide 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
3: Installation of EDS3000PR/EDS3000PS
EDS3000 Device Server User Guide
27
Figure 3-9
Example of EDS3032PR Connections
Installing the EDS3000PS Devices
Finding a Suitable Location
You can install the EDS3000PS device as a desktop unit or it can be mounted to existing wall
brackets (not provided) using mounting holes located on the bottom of the EDSPS. If using AC
power, avoid outlets controlled by a wall switch.
Connecting the EDS3000PS Devices
1.
Power off the serial devices that will be connected to the EDS3000PS device.
2.
Attach a serial cable between the EDS3000PS device and your serial device. For a list of
cables and adapters you can use with the EDS3000PS device, refer to
Appendix D: Lantronix
Cables and Adapters
.
3.
Connect an Ethernet cable between the EDS3000PS device Ethernet port and your Ethernet
network.
4.
Insert the power cord into the back of the EDS3000PS device. Plug the other end into an AC
wall outlet. After power-up, the self-test begins.
5.
Power up the serial devices.
Power
10/100/1000 Base-T Ethernet
Serial Device