Lantronix XPort Pro LX6 xPort Pro Lx6 - User Guide - Page 44
FTP Settings, To Con FTP Settings, Using Web Manager, Using the CLI, Using XML, Syslog Settings
View all Lantronix XPort Pro LX6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
9: Services Settings FTP Settings The FTP protocol can be used to upload and download user files, and upgrade the XPort Pro Lx6 firmware. A configurable option is provided to enable or disable access via this protocol. FTP Settings State Table 9-2 FTP Settings Description Select to enable or disable the FTP server: Enabled (default) Disabled To Configure FTP Settings Using Web Manager To configure FTP, click FTP in the menu. Using the CLI To enter the FTP command level: enable -> config -> ftp Using XML Include in your file: Syslog Settings The Syslog information shows the current configuration and statistics of the syslog. Here you can configure the syslog host and the severity of the events to log. Note: The system log is always saved to local storage, but it is not retained through reboots unless diagnostics logging to the filesystem is enabled. Saving the system log to a server that supports remote logging services (see RFC 3164) allows the administrator to save the complete system log history. The default port is 514. Syslog Settings State Host Remote Port Table 9-3 Syslog Settings Description Select to enable or disable the syslog: Enabled Disabled (default) Enter the IP address of the remote server to which system logs are sent for storage. Enter the number of the port on the remote server that supports logging services. The default is 514. XPort® Pro Lx6 Embedded Device Server User Guide 44