Lantronix XPort Pro LX6 xPort Pro Lx6 - User Guide - Page 57
System Settings, To Reboot or Restore Factory Defaults, Using Web Manager, Using the CLI, Using XML
View all Lantronix XPort Pro LX6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
10: Maintenance and Diagnostics Settings System Settings The XPort Pro Lx6 System settings allow for rebooting the device, restoring factory defaults, uploading new firmware and updating a system's short and long name. Note: Anytime you reboot the unit, this operation will take some time to complete. Please wait a minimum of 25-30 seconds after rebooting the unit before attempting to make any subsequent connections. Table 10-11 System Settings System Settings Description Reboot Device Reboots the device. Restore Factory Defaults Restores the device to the original factory settings. All configuration will be lost. The XPort Pro Lx6 automatically reboots upon setting back to the defaults. Upload New Firmware FTP to the XPort Pro Lx6.Write the new firmware file to firmware.rom on the XPort Pro Lx6. The device automatically reboots upon the installation of new firmware. See the section, FTP Settings on page 44. Short Name Enter a short name for the system name. A maximum of 32 characters are allowed. Long Name Enter a long name for the system name. A maximum of 64 characters are allowed. To Reboot or Restore Factory Defaults Using Web Manager To access the area with options to reboot, restore to factory defaults, upload new firmware, update the system name (long or short names) or to view the current configuration, click System in the menu. Using the CLI To enter the command level: enable Using XML Include in your file: Table 10-12 CLI Configuration Default Settings Line Authentication Telnet State Telnet Authentication All CP groups Disabled Enabled Disabled Disabled XPort® Pro Lx6 Embedded Device Server User Guide 57