Lantronix XPort Pro LX6 xPort Pro Lx6 - User Guide - Page 54
Ping, To Ping a Remote Host, Using Web Manager, Using the CLI, Using XML, Traceroute
![]() |
View all Lantronix XPort Pro LX6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
10: Maintenance and Diagnostics Settings Ping The ping command can be used to test connectivity to a remote host. Table 10-8 Ping Settings Diagnostics: Ping Description Settings (continued) Host Enter the IP address or host name for the XPort Pro Lx6 to ping. Count Enter the number of ping packets XPort Pro Lx6 should attempt to send to the Host. The default is 3. Timeout Enter the time, in seconds, for the XPort Pro Lx6 to wait for a response from the host before timing out. The default is 5 seconds. To Ping a Remote Host Using Web Manager To ping a Remote Host, click Diagnostics in the menu and select Ping. Using the CLI To enter the command level: enable Using XML Not applicable. Traceroute Here you can trace a packet from the XPort Pro Lx6 to an Internet host, showing how many hops the packet requires to reach the host and how long each hop takes. If you visit a web site whose pages appear slowly, you can use traceroute to determine where the longest delays are occurring. Diagnostics: Traceroute Settings Host Protocol Table 10-9 Traceroute Settings Description Enter the IP address or DNS hostname. This address is used to show the path between it and the XPort Pro Lx6 when issuing the traceroute command. Specify the traceroute protocol. The default port is TCP. To Perform a Traceroute Using Web Manager To perform a Traceroute, click Diagnostics in the menu and select Traceroute. XPort® Pro Lx6 Embedded Device Server User Guide 54
![](/manual_guide/products/lantronix-xport-pro-lx6-xport-pro-lx6-user-guide-891c1c4/54.png)