Lenovo 6234A1U User Manual - Page 70
If the rollers are dirty, clean them by using a cotton swab soaked in isopropyl
View all Lenovo 6234A1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Note: The following illustration might be slightly different from your mouse. 1 Retainer ring 2 Ball 3 Plastic rollers 4 Ball cage To clean a non-optical mouse, do the following: 1. Turn off your computer. 2. Disconnect the mouse cable from the computer. 3. Turn the mouse upside down. Twist the retainer ring 1 to the unlocked position to reveal the ball. 4. Place your hand over the retainer ring and ball 2 , and then turn the mouse bottom-side down, so that the retainer ring and ball fall out into your hand. 5. Wash the ball in warm, soapy water. Then dry it with a clean cloth. 6. Blow air carefully into the ball cage 4 to dislodge dust and lint. 7. Look for a buildup of dirt on the plastic rollers 3 inside the ball cage. This buildup usually appears as a stripe running across the middle of the rollers. 8. If the rollers are dirty, clean them by using a cotton swab soaked in isopropyl (rubbing) alcohol. Turn the rollers with your finger and continue swabbing them until all the dirt is removed. Be sure the rollers are still centered in their channels after you clean them. 9. Remove any fibers from the swab that might be remaining on the rollers. 10. Reinstall the ball and the retainer ring. Twist the retainer ring to the locked position. 11. Reconnect the mouse cable to the computer. 12. Turn your computer back on. 62 User Guide